Stocking Distributors

  • www.onlinecomponents.com Logo
  • PUI Interconnect Distributor LOGO
  • TLC Electronics Logo

E-MATE+ Header cONNECTORS

EDAC Box headers are widely used for board to board or wire to board connections. Right angle, vertical and custom bends are available.

The EDAC E-PIN male headers mate with the E-Socket receptacles providing a reliable and economical BTB connection. Available in multiple contact spacing options, in single, two or three row configurations. Termination styles include vertical or right angle through hole, and SMT. Contacts can be supplied with tin or various gold plating thicknesses. Available with customized mating heights, special bends, and much more.

The EDAC E-Socket receptacle headers mate with the E-Pin plug headers providing a reliable and economical BTB connection. A wide variety of sizes, in single, two or three row configurations. Multiple contact spacing options, and contact plating options, and are available in vertical or right angle, for through hole or SMT mounting to the PCB. These headers are easily customized to facilitate special mating heights, special contact bends, and much more.

EDAC DIN connectors are fully compliant with DIN41612 standards. High density metal to metal connections provides a high continuity interconnect solution in backplanes. Contacts can be fully loaded or selectively loaded to protect against cross talk in high-speed applications.

bOX hEADER cONNECTORS

  • Various contact pitches available
  • Single or double row
  • Plating options from gold flash to 30u" gold
  • Open or closed ends with or without latches
  • Various housing height options

PIN HEADER CONNECTORS

  • Header posts can be cut to any height and board depth
  • Wide variety of plating options
  • Vertical, right angle or custom bends
  • Breakaway design allows for easy separation into smaller units
  • Colored insulators are available
  • Wide range of custom capabilities and options
  • High temperature materials are available
  • 200 mating cycles minimum
  • RoHS compliant

Socket Header Connectors

  • Wide variety of plating options
  • Vertical, right angle or custom bends
  • Sockets available with right angle and SMT contacts
  • Colored insulators are available
  • Wide range of custom capabilities and options
  • High temperature materials are available

DIN 41612 Connectors

  • From 5 to 96 contacts available in three rows
  • Plating options from flash to 30u" gold
  • Solder tail, wire wrap and press fit terminations
  • Mounting options include through hole or board locks
  • Wide operating temp range of -55° C to +105° C

Header Connectors

Specification

Description

Web

Insulator Material UL 94V-0 Thermoplastic Polyester
Contact Material Copper Alloy
Contact Plating Selective Gold Plating over Nickel with Tin Plated Tails
Current Rating
Various, Depending On Connector
Contact Resistance 10 milliohms maximum
Insulation Resistance 1000 megaohms minimum
Dielectric Withstanding Voltage
Various, Depending On Connector
Operating Temperature -40°C to +105°C





DIN 41612 Connectors

Specification

Description

Web

Insulator Material30% Glass Filled PBT, UL 94V-0 (461/462/463/494/495/496 series)


Thermoplastic Polyester Glass Filled, UL 94V-0 (464/493 series)

Contact MaterialBrass (461/463 series)


Phosphor Bronze (462/494/495/496 series)

Copper Alloy (464/493 series)

Contact PlatingSelective Gold Plating
Current Rating
2 Amps @ 20°C
Contact Resistance20 milliohms, maximum (464/493 series)


30 milliohms maximum (461/462/463/494/495/496 series)

Insulation Resistance1000 megaohms
Dielectric Withstanding Voltage
1000 V AC RMS
Basic Grid
2.54mm (.100”)
Operating Temperature-40°C to +105°C (461 series)


-55°C to +105°C (462/463/464/493/494/495/496 series)

Contact Us


Have a question for EDAC? Connect with us. Experience makes the difference.

Connect

Cookie Policy

This site uses cookies and other tracking technologies to assist with navigation and your ability to provide feedback, analyse your use of our products and services. Cookie Policy.

I Accept