717 Series

Category:

UL Certified
.156" (3.96mm) Contact spacing x .200" (5.08mm) row spacing
Accepts .062" (1.57mm) nominal thickness P.C. board
Low profile insulator body, .550"(13.97mm) high
Contact termination options include P.C. tail, and .025" (0.64mm) square wire wrap
Press-Fit compliant section for gas tight reliable connection in plated through holes eliminates soldering operations
Single or dual row configurations
Accepts between contact and In-Contact polarizing keys (Special features if requested)
Tools available for insulator and contact removal. Simple "Flat Rock" tooling is used for connector installation.
RoHS Compliant

Insulator Material : Thermoplastic Polyphenylene Sulfide (PPS), UL 94V-0, Black Color
Contact Material : Copper Alloy
Contact Plating : 30u" Gold Plating on mating area and Tin Plating on tails with Nickel underplating all over
Current Rating : 3 Ampere
Contact Resistance : 10 milliohms Maximum
Dielectric Withstand Voltage : 1200 VAC rms at sea level between adjacent contacts
Insulation Resistance : 5000 Megaohms Minimum
Operating Temperature : -40°C to +105°C
Insertion Force : 16oz (4.45N) maximum per contact pair when tested with .070" (1.78mm) thick gauge
Withdrawal Force : 1oz (0.28N) minimum per contact pair when tested with .054" (1.37mm) thick gauge
Contact insertion into Hole : 20 lbs (89 N) Maximum
Contact Retention in Hole : 10 lbs (44 N) Minimum
Re-Insertability in same Hole : 3 Times Minimum